MPO/MTP cable, also referred to Multiple-Fiber Push-On/Pull-off cable,which is used in data centers.
Low insertion loss, high return loss MPO MTP based Multi-fiber Connector, 4,8,12 and 24 fiber connector terminations and assemblies Economical solution for mass-termination of fiber Designed for low loss and Straight loss SM and MM applications Ruggedized round cable, oval cable and bare ribbon options available Color coded housings available to differentiate fiber type, polish type and/or connector grade Good in repeatability and exchange ability.
MTP®/MPO cables, which consist of MTP®/MPO connectors and optical fibers, are essential components for high-density connectivity solutions. These connectors are available in two types: female (without pins) and male (with pins). By significantly increasing cable density and saving valuable circuit card and rack space, MTP®/MPO connectors are ideally suited for current 40G/100G cabling systems and future network speed upgrades.
Share:
Features of MPO cable：
1.MPO Connector with Optimal 0.35dB Low Insertion Loss.
2.Corning ClearCurve® Fiber with 7.5mm Min. Bend Radius
3.Plenum (OFNP) Fire Safety-Rated for Use in Plenum Air Spaces.
4.Color-Coded MPO Connector Boots for Easy Identification.
5.Typically Used for Patching Within a Cabinet.
Specification
MPO cable Harness,MPO-8 APC (Female) to 4 LC UPC Duplex, 8 Fibers, Multimode (OM4), Magenta
| Connector A | MPO APC | Connector B | LC UPC Duplex |
| Fiber Mode | OM4 50/125μm | Wavelength | 850/1300nm |
| Glass Fiber | Corning | Fiber Grade | G.657.A1 |
| MTP Connector IL | 0.35dB Max (0.15dB Typ.) | LC Connector IL | ≤0.2dB |
| MTP Connector RL | ≥20dB | LC Connector RL | ≥30dB |
| Attenuation at 850nm | ≤2.3dB/km | Attenuation at 1300nm | ≤0.6dB/km |
| Attenuation at 1310nm | ≤0.32dB/km | Attenuation at 1550nm | ≤0.18dB/km |
| Cable Jacket | Plenum (OFNP) | Fiber Count | 8 Fibers |
| Polarity | Type A, B,C | Cable Length | Customized |
| Cable Outside Diameter (OD) | 3.0mm | Breakout Outside Diameter (OD) | 2.0mm |
| Installation Tensile Load | 66N | Tensile Strength (Long/Short Term) | 80/240N |
| Storage Temperature | -40 to +85°C | Operating Temperature | -40 to +70°C |
Per-terminated MPO cable Technology-Polarity:
MTP®/MPO cable types by polarity refer to the difference between the optical transmitters and receivers at both ends of the fiber link. Due to the special design of MTP®/MPO connectors, polarity issues must be addressed in high-density MTP®/MPO cabling systems.
The TIA 568 standard defines three connection methods to ensure the correct polarity of the optical path, called Type A, Type B, and Type C.
Ordering information
| ① | Ferrule Type：UPC,APC | ⑤ | Fiber Count | 4/8/12/16/24...(customized) |
| ② | Connector Typpe:Male,Female | ⑥ | Cable Length(m):5m...(customized) | |
| ③ | Cable Diameter: Φ0.9/2.0 | ⑦ | Polarity | TypeA/B/C |
| ④ | Fiber Type：G657A1,G652D...,OM1~0M5 | |||
Inquiry
You Might Also Like
